R/C Transmitters & Receivers
448002 GWS 4 channel Pico Receiver
£14.05 Inc Vat
448009 GWS 6 channel Naro Receiver
£17.89 Inc Vat
448005 GWS 8 channel Micro Receiver single conversion
£19.75 Inc Vat
448004 GWS 8 channel Receiver dual conversion Mk 2
£29.65 Inc Vat
The 4 channel pico receiver has been specifically designed for indoor use only and is equipped with a 50cm aerial appropriate for indoor use.
Miniature Naro crystals
All GWS 4 and 6 channel receivers require the micro GWS Naro crystals.
Click here to see our range of Naro crystals
448017 GWS 8 channel Receiver single conversion Mk 2
£24.69 Inc Vat
The compact, lightweight and slim design make the 8-channel dual conversion And 8 channel single conversion FM receivers especially suitable for narrow fuselages.

Whole newly designed, active front end with dual gate MOS-FET to improve the inter-modulation and interference suppression.
The AGC (Automatic Gain Control) stage features a broad regulatory range and ensures optimum reception both at close and long range.

The Multi-stage band passed filter and crystal filter are for narrow-band reception, high adjacent channel selectivity and interference rejection
35 Mhz Receivers
478017 BTCH611 6 channel Long Range Micro Receiver
£11.99 Inc Vat
6 Channel RX
The RS610II Receiver uses dual tuned RF circuitry with dual ceramic IF filters.
This feature gives the receiver ultra narrow selectivity to enable it to reject
co-channel interference more effectively.
This is especially important when flying indoor aircraft where many
transmitters may be in use at the same time.
Size                                                          36 x 18.7 x 8.2mm
Weight                                     6.8g with shrinkwrap
Sensitivity                                                Better than 2.0uV
Selectivity                                                +/-8kHz @ 65dB down
Channels                                  1-6
Filtering                                   Dual tuned RF circuitry
Filtering                                   Dual 4 pole ceramic filter
Filtering                                   DSP filtering with mild algorithm
Modulation                                              FM/PPM
Shift polarity                           Positive or Negative (auto detect)
Case                                                         Shrinkwrap
Operating Voltage    4.8 - 6.0v DC
Operating current     11mA
478025 Balance bar for 2.4Ghz Transmitters. Screws in to neckstrap mounting on TX
£6.99 Inc Vat
Please Note
Because of the way PayPal calculates postage it is possible when buying multiple items, for an overcharge to occur.
Model-pro Ltd always try to charge postage at cost.
If an overcharge occurs we will refund the amount of this overpaymet.
Please contact us if you have any questions regarding postage.
If you prefer to phone us with your order, we are happy to accept all major credit cards.
Please see our "Contact us" page